Krüger & Matz ODYSSEY Mode D'emploi page 29

Owner's manual
Connecting to power mains
Soundbar: Unwind the power adapter and mains cable to their full length. Connect
the power adapter to the DC IN 23V socket of the soundbar, then connect the power
cable to the adapter and into a power mains socket.
Subwoofer: Connect the power cable to the AC~ socket of the subwoofer and then
into a power mains socket.
Note:
• Before connecting the AC power cord, ensure you have completed all other
connections.
• Risk of product damage! Ensure that the power mains voltage corresponds to
the voltage required by this device.
• Disconnect the mains plug from the mains socket if you want to switch the unit
OFF completely.
Connecting subwoofer
Automatic pairing
The subwoofer and soundbar will automatically pair when both units are plugged
into the mains sockets and turned on. No cable is needed for connecting the two
units.
1. When the subwoofer is pairing with the main unit, the pair indicator will flash fast.
2. When the subwoofer is paired with the main unit, the pair indicator will light up.
NOTE:
• Do not press the pair button on the rear of the subwoofer, except for manual
pairing.
• If the automatic pairing fails, pair the subwoofer with the main unit manually.
Manual pairing
1. Ensure that all the cables are properly connected and the device is in standby
mode.
2. Press and hold the pair button on the rear of the subwoofer for a few seconds.
29