E16 Series Introduction; Permitted Uses; Forbidden Uses - AUtec E16 Série Mode D'emploi

Industrial radio remote controls of the E16 series
are used to command machines from a distance.
Each industrial radio remote control is made up of
a portable transmitting unit, from which the user
can remotely control the machine, and a receiving
unit installed on board the machine itself.
The transmitting unit uses radio frequencies to
transmit a coded message which contains a value
called address. Each receiving unit can only de-
code the messages coming from a transmitting unit
with the same address.
This excludes the possibility of an interference ac-
tivating any system function. If the radio frequency
transmission is disturbed, incorrect or interrupted,
the receiving unit autonomously stops the whole
system.
Every E16 series radio remote control is in conformity
with the R&TTE 99/05/CE directive and its essential requirements.
Each radio remote control is also in conformity
with the norms given in the EC conformity declaration that is included in this manual.
!
Autec cannot be held responsible if the radio remote control is in-
stalled on applications that are different from those permitted:
Material hoisting machines (construction cranes, industrial bridge
cranes, machines for moving material in general,...).
Machines installed in areas where equipment with explosion-proof
characteristics are being used.
Machines for moving, raising and transporting people.
Page 18 of 80

2 E16 SERIES INTRODUCTION

PERMITTED USES

FORBIDDEN USES

2 - E16 series introduction
Receiving
unit
Transmitting
unit
LIESNMU4