AUtec E16 Série Mode D'emploi page 24

The guarantee terms for the radio remote control are stated in the "Certificate of guar-
antee".
The technical data sheet shows the wiring diagram between the receiving unit and the
machine. The technical data sheet must be filled out and checked by the installer, who
is responsible for a correct wiring. Once all necessary checks have taken place the in-
staller must undersign the technical data sheet, which must be kept with the user's
manual (always keep a copy of this data sheet in case it is needed for administrative
purposes).
The radio remote control identification and approval data is given on plates that are on
both the transmitting unit and the receiving unit.
The plates MUST NOT be damaged or removed from where they are placed. Plate
removal immediately renders the guarantee null and void.
Frequency band with radio module E16STXEU1
.......................................................................................... or 433.050 - 434.790 MHz
Frequency band with radio module E16STXEU2.................. 869.700 - 870.000 MHz
Programmable radio channel ......................................... 16 (434.040 - 434.790 MHz)
....................................................................................... 32 (433.050 - 434.790 MHz)
....................................................................................... 12 (869.700 - 870.000 MHz)
Channel spacing................................................................................................ 25kHz
Hamming distance................................................................................................... ≥8
Probability of non-recognition of error ....................................................... <10 exp-11
Typical working range ....................................................................................... 100 m
Time of reply to STOP command .................................................................. ~ 100 ms
Time of reply to SIRIO E command............................................................... ~ 100 ms
Time of reply to SIRIO 42 command ............................................................ ~ 150 ms
Passive emergency time (or passive stop)
1
refer to the "Limitations & Authorisations" insert to select the permitted working band and paragraph 8 "Program-
ming" if setting is necessary.
2
refer to paragraph "Programmings" in the receiving unit manual, DIP nr. 1 settings.
!
Due to the characteristics of radio propagation (i.e. : EM interferenc-
es, near out-of-range condition), a delay up to one second may occa-
sionally occur between command release and actual deactivation of
outputs.
Care must be taken to ensure that this could never lead to a danger-
ous situation in the specific uses.
Page 20 of 80
CERTIFICATE OF GUARANTEE
TECHNICAL DATA SHEET
IDENTIFICATION PLATES
GENERAL TECHNICAL DATA
2
............................................... 0.35/1 sec
2 - E16 series introduction
1
............... 434.040 - 434.790 MHz
LIESNMU4