Genius Nicer Twist Mode D'emploi page 6

The Nicer Twist in practical use


GB



Tip
The handle is not fixed firmly into the handle cover. If you lift the cover, it can easily fall out. Ensure
that you either hold the handle in place or remove it before lifting the cover and replace it before using
the device again.
6
Place the mixing bowl on the work surface in front of you. Then
place the two blade inserts vertically into the blade guides provided
in the mixing bowl.
Now place the transparent cover in position. It is correctly in place if
the side support surfaces of the cover are on the frame of the mixing
bowl. The two blade inserts are securely fixed if their upper ends
protrude out of the two round openings in the transparent cover.
Place the handle base on the mixer bowl – when you hear a click,
the base is fixed in place.
Place the handle cover with
the recesses provided verti-
cally onto the mountings in
the handle base.
Then close the cover. Now fit
the handle. The centring me-
chanism on the handle must
be inserted into the centring
opening provided- the Nicer
Twist is then ready to use.
Figure: