Removing And Fitting The Battery; Switching The Trimmer On/Off; Switching Off The Brushcutter; Testing The Trimmer And Battery - Stihl FSA 60 R Notice D'emploi

English
9 Removing and Fitting the
Battery
9.1 Fitting the Battery
2
1
► Insert the battery (1) in the battery compart‐
ment (2) and press it home until you hear a
click.
Arrows (3) on battery (1) are still visible and
battery (1) is held securely in battery compart‐
ment (2). There is no electrical contact
between the trimmer and battery (1).
► Push the battery (1) into the battery compart‐
ment (2) as far as stop.
The battery (1) engages with a second click
and is flush with the trimmer's housing.
9.2 Removing the Battery
► Stand the trimmer on a level surface.
► Hold one hand in front of the battery compart‐
ment to ensure the battery does not fall out.
2
► Press the locking lever (1) with your other
hand.
The battery (2) is unlocked and can be
removed.
10 Switching the Trimmer
On/Off
10.1 Switching the Brushcutter on
► Hold the brushcutter firmly with one hand on
the control handle – wrap your thumb around
the handle.
► Hold the brushcutter firmly with your other
hand on the loop handle or the handle hose
34
3
1

9 Removing and Fitting the Battery

such that your thumb holds the loop handle or
the handle hose.
► Push the release slide (1) in the direction of
the loop handle with your thumb and hold it
there.
► Squeeze and hold the trigger (2) with your
index finger.
The brushcutter accelerates and the cutting
attachment rotates.
The release slide can be released (1).
If the Ergo lever (3) is pressed, the trigger (2)
remains unlocked. This means that the trigger
can be released and pressed again without
pushing the release slide again in the direction of
the loop handle.
If the trigger (2) and the Ergo lever (3) are
released, the trigger (2) is locked. To unlock the
trigger (2), push and hold the release slide (1)
again towards the loop handle.
10.2

Switching off the brushcutter

► Release the trigger and the Ergo lever.
► Wait for the cutting attachment to stop rotat‐
ing.
► If the cutting attachment continues to rotate:
Remove the battery and contact your STIHL
dealer.
The brushcutter is defective.
11 Testing the Trimmer and
Battery
11.1

Checking the controls

Release slide, Ergo lever and trigger
► Remove the battery.
► Try squeezing the trigger switch without acti‐
vating the release slide.
► If you can press the trigger: Stop using your
brushcutter and contact a STIHL dealer.
The release slide is faulty.
► Push the release slide in the direction of the
loop handle with your thumb and hold it there.
► Press and hold Ergo lever.
1
3
2
0458-832-9621-D