Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
www.electrolux.com
8
CONTROL PANEL
High temperature alarm light
1
Pilot light
2
Action Freeze light
3
Action Freeze switch
4
and Alarm reset
ACTION FREEZE FUNCTION
You can activate the Action Freeze function
by pressing the Action Freeze switch.
The Action Freeze light will light up.
This function stops automatically after 52
hours.
It is possible to deactivate the function at
any time by pressing Action Freeze switch.
The Action Freeze light will switch off.
HIGH TEMPERATURE ALARM
An increase in the temperature in the freez-
er (for example due to an power failure) is
indicated by:
• switching on of the Alarm light
• sounding of buzzer.
During the alarm phase, the buzzer can be
switched off by pressing the Alarm reset
switch.
During the alarm phase, don't place food
inside the freezer.
When normal conditions are restored the
Alarm light will switch off automatically.
1
2
3
4
Publicité
Chapitres
Table des Matières
