Operation - Dimplex Novara DF2550-EU Mode D'emploi

Fireplace Installation
piece, solid, flat surface under
the fireplace insert. Ensure
that both of the insert's feet
rest securely on this surface.

Operation

Electric Fireplace Manual
Control
Figure 4
B
C
A. Main On/Off Switch
The Main On/Off Switch supplies
power to all fireplace functions.
B. Manual Selection Buttons
The Manual Selection Buttons
operate the fireplace's functions
manually.
10
A
D
!
NOTE Fix the unit with
screws through the bottom panel
under the log set. See Fig. 7
Once the fireplace is switched
on, pressing the " I " button will
advance through the fireplace's
three levels of operation:
Level 1: The flame effect is turned
on and the first indicator light
illuminates.
Level 2: The flame effect remains
on, the heater is activated to the
low heat setting, and the first and
second indicator light illuminates.
Level 3: The flame effect remains
on, the heater is set to the high
heat setting, and all three (3)
indicator lights illuminate.
Pressing the "
time will turn off the fireplace.
C. Indicator Lights
The Indicator Lights will illuminate
as the fireplace enters the various
levels of function.
" button at any
www.dimplex.com