Indicator Charge Level (Battery 24 V, 4 Ah); Used Batteries; Assembling Instructions; Operation - Grizzly ART 2420 Lion Traduction De La Notice D'utilisation Originale

GB
Indicator charge level
(Battery 24 V, 4 Ah)
Press the „Press" button on the right of
charging level indicator in order to check
the status of the battery.
The number of illuminated LED lights
shows the charge level of the battery. 4
lights means battery is fully charged. 1
light means that the battery needs to be
charged.

Used batteries

• If a fully recharged battery lasts for
considerably shorter operating times,
the battery is used up and needs to
be replaced. Only use an OEM battery
pack replacement available from our
Customer Service.
• Always take heed of the applicable
safety instructions as well as the envi-
ronmental protection regulations and
information (see "Cleaning and Main-
tenance").

Assembling instructions

Do not insert the battery until
the appliance is fully assembled.
Risk of injury!
To put on the protective cover:
C
1. Place the protective cover (14)
on the motor head (11) and
screw it down with the 3 Phillips
screws.
To put on the auxiliary handle:
D
2. Pull the ends of the auxiliary
handle (5) to extend the han-
dle and slide it over the handle
holder (20).
32
3. Screw down the screw (6) in the
auxiliary handle (5).

Operation

Caution: risk of injury! Do not
operate the appliance without
the protective cover. To oper-
ate the appliance, wear suitable
clothing, eye and ear protection.
Prior to every use, check that
the appliance is operative. Do
not block the On/Off switch or
the switch lock. They must reli-
ably turn off the motor when you
release the switch. Do not oper-
ate the appliance if one of the
switches is damaged.
Please observe local regulations
concerning noise protection.

Turning on and off

Maintain a firm stand and hold the
appliance well with both hands and
at some distance away from your
body. Before turning on the appli-
ance, check that it will not touch
any objects.
1. Check that the battery (18) is in.
2. To turn on, use your thumb to
actuate the switch lock (3), then
press the On/Off switch (2). Re-
lease the switch lock.
3. To turn off, release the On/Off
switch (2). There is no continu-
ous operation mode.
After turning off the appliance,
the trimming assembly will keep
revolving for some time. Allow
the trimming assembly to come
to a standstill. Neither touch nor