General Maintenance; Replacing The Trimming Assembly; Storage - Grizzly ART 2420 Lion Traduction De La Notice D'utilisation Originale

• After every trimming session, remove
grass and soil from the protective
cover and the trimming assembly.

General maintenance

• Prior to every use, check the appli-
ance for obvious defects such as
loose, worn or damaged parts.
Check that the screws in the cutting
disk are tight.
• Check covers and safety devices for
damages and correct installation. Re-
place as necessary.
Replacing the trimming
assembly
Never manipulate the cutting de-
vice by inserting worn out original
or alien parts. Only use original-
spare parts. Never use metal lines.
The use of alien parts can result in
serious personal injury and cause
irreparable damage to the trimmer
and the guarantee will become in-
stantly null and void.
Exchanging the line spool:
1. Switch off the device and remo-
I
ve the battery (
device.
2. Turn over the trimmer so that
the cutting head (13) is facing
upwards
3. Press the two latches on the
hood (21) at the same time and
remove them.
4 Remove the line spool (17) from
the cutting head.
5. Set the new string spool with
the smooth side facing upward
onto the cutter head and put
the string end through the string
Change string cutter:

Storage

•
18) from the •
•
•
outlet eye (22). Pay attention
that the string end does not slip
off the grooves of the spool.
6. Return the hood.Ensure that the
locks of the hood are accurately
inserted in the corresponding
recesses of the cutting head.
They lock in audibly.
7. Keep the latch button (23)
pressed and pull out the string
end far enough so that it protru-
des over the string cutter (15).
Check the string cutter. Never use
the device without a string cutter or
defective string cutter. Replace a
defective string cutter.
1. Switch off the device and remo-
J
ve the battery (
device.
2. Screw off the string cutter (15)
from the protective cover (14).
3. Screw the new string cutter (15)
onto the protective cover.
Clean the device prior to storage.
Store the trimmer in a dry place well
out of reach of children.
Do not stand the trimmer on its pro-
tective cover. Suspend it by its upper
handle in such a manner that the
protective cover does not come into
contact with other objects. This is be-
cause the protective cover could be-
come deformed, thereby changing its
dimensions and its safety properties.
In order to keep the battery well
charged, avoid exposing the appliance
to extreme heat or cold in storage.
GB
18) from the
35