Frequently Asked Questions - Lumie Bodyclock active 250 Guide D'utilisation

Frequently asked questions

English 17
Frequently asked questions
I tried out the sunrise but the light comes up really quickly
You probably didn't allow enough time for a full sunrise. For example, the
default sunrise takes 0 minutes so if the clock shows the time as 11.00 then
you need to set the wake-up time to at least 11.0.
What happens when I unplug my Bodyclock active or there's a power cut?
Your Bodyclock Active keeps time for one hour; other settings are permanent,
so you won't need to reprogram the unit, just plug it back in. If you need to
adjust the time, see Customisation options, page 1.
If you receive a strong FM radio signal, the clock keeps time when tuned to a
station with RDS (Radio Data System) as it includes an embedded time signal.
the display is too bright when I'm trying to sleep; how can I change it?
See To set the display brightness, page 1.
What can I do if the display is working but the light doesn't come on?
Check to make sure the bulb is firmly screwed into the socket. If this doesn't
work, replace the bulb.
Why is nothing happening when I press the buttons?
You may have accidently set the unit to demonstration mode (only useful for
shops, exhibitions etc!) so try pressing + for 1 seconds. If that doesn't work or if
the display shows RESET, see How do I restore the default factory settings? below.
How do I restore the default factory settings?
E
Turn off the power at the mains. Press and hold as you turn the power back
on. Release the button when the software version number shows.
What can I do if neither the display nor light are working?
A fuse may have blown. With the unit unplugged, try replacing the  ampere
fuse in the plug or the  ampere fuse in the unit; simply unscrew the black
fuse holder underneath.
Please contact Lumie if you need a replacement bulb or if you still have a
problem with your Bodyclock Active.