7. Tighten the locking screws of the rack wheels.
8. Plug the left-hand end of the shaft as far as it will go into the round holder on the
left-hand side of the cooking space (16) (see Illustration B3). Then hang the other
end of the shaft into the support on the right-hand side of the cooking space (see
Illustration B4).
9. Check that it fits securely. The rack must not be able to rotate about its own axis when
the device is switched off. If this is not the case, plug the left-hand end of the shaft
deeper into the holder.
After use, remove the hot rack from the cooking space using the removal tool (5) (see
the "Removal Tool" section).
To remove the skewers from the rack, press together the clips. It is essential that you use
oven gloves to do this!
Rotating Spit
The rotating spit consists of the shaft (4) and two rotating spit forks (3). The rotating spit
is suitable for grilling large pieces of meat, e.g. chicken, grilled or roast pork.
Assemble the rotating spit and insert it into the device:
PLEASE NOTE!
■
The shaft contains two small round notches. They mark the outermost position of the
locking screws. These must not be attached any further than the outer ends of the
shaft to ensure that smooth operation is possible.
■
Do not place any pieces that are too large onto the rotating spit so that it can rotate
without any hindrance.
1. Slide one of the rotating spit forks onto the shaft and lock it with the locking screw.
The shaft contains a small round notch for the tip of the locking screw. In the case of
smaller pieces of food, the rotating spit forks can be secured more centrally on the
shaft.
2. Slide the items you want to grill onto the rotating spit.
3. Slide the other rotating spit fork onto the shaft and lock it with the locking screw.
4. Plug the left-hand end of the shaft with just one notch (see Illustration C1) as far as
it will go into the round holder on the left-hand side of the cooking space (16). Then
hang the other end of the shaft into the support on the right-hand side of the cooking
space.
5. Check that it fits securely. The rotating spit must not be able to rotate about its own
axis when the device is switched off. If this is not the case, plug the left-hand end of
the shaft deeper into the holder.
After use, remove the hot rotating spit from the cooking space using the removal tool (5)
(see the "Removal Tool" section). Always use oven gloves to remove the rotating spit
forks and take off the grilled items.
Rotating Basket
In the rotating basket (2), the food is rotated during cooking so that it becomes crispy on
all sides. The rotating basket is particularly suitable for preparing chips or other potato
products, small pieces of vegetables and meat as well as frozen products, e.g. chicken
nuggets or squid rings.
02095_ 02363_ 04180_ 04184_ 04189_Inlay_de-en-fr-nl_A5_V4.indb 29
29
EN
18.10.2019 10:15:24