Intended Use; Product Features; Technical Data; Declaration Of Conformity - Bosch PHO 20-82 Notice Originale

OBJ_BUCH-631-001.book Page 16 Monday, January 14, 2008 9:55 AM
16 | English

Intended Use

The machine is intended for planing of firmly sup-
ported wooden materials, such as beams and
boards. It is also suitable for beveling edges and
rebating.

Product Features

The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Chip ejector (alternatively right/left)
2 Depth adjustment knob
3 Planing depth scale
4 Chip ejection selector lever
5 On/Off switch
6 Safety switch for On/Off switching
7 Belt cover
8 Screws for belt cover
9 V-grooves
10 Planer base plate
11 Blade drum
12 Clamping element for blade
13 Fastening screw for planer blade
14 Carbide blade (TC)
15 Allen key*
16 Extraction hose ( Ø 35 mm)*
17 Chip/dust bag*
18 Parallel guide*
19 Scale for rebating width
20 Locking nut for adjustment of rebating width
21 Fastening bolt for parallel and beveling guide
22 Angle stop*
23 Locking nut for angle adjustment
24 Fastening bolt for rebating depth stop
25 Rebating depth stop*
26 Park rest
27 Drive belt
28 Large pulley
29 Small pulley
*The accessories illustrated or described are not in-
cluded as standard delivery.
**Commercially available (not included in the delivery
scope)
1 609 929 N10 | (14.1.08)

Technical Data

Planer
Article number
Rated power input
Output power
No-load speed
Planing depth
Rebating depth
Planing width, max.
Weight according to
EPTA-Procedure 01/2003
Protection class
The values given are valid for nominal voltages [U] of
230/240 V. For lower voltage and models for specific
countries, these values can vary.
Please observe the article number on the type plate of
your machine. The trade names of the individual ma-
chines may vary.

Declaration of Conformity

We declare under our sole responsibility that the
product described under "Technical Data" is in
conformity with the following standards or
standardization documents: EN 60745 according
to the provisions of the directives 2004/108/EC,
98/37/EC (until Dec. 28, 2009), 2006/42/EC
(from Dec. 29, 2009 on).
Technical file at:
Robert Bosch GmbH, PT/ESC,
D-70745 Leinfelden-Echterdingen
Dr. Egbert Schneider Dr. Eckerhard Strötgen
Senior Vice President Head of Product
Engineering Certification
29.11.2007, Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
PHO 20-82
0 603 365 1..
W 680
W 320
rpm 19500
0 – 2
mm
0 – 8
mm
mm 82
kg 2.2
/ II
Bosch Power Tools