Installation And Setting - Meister MPS800-1 Traduction Du Manuel D'utilisation Original

• Have repairs to the laser marking aid
carried out by specialists only.
• Do not introduce hard objects into the
laser optic (14).
• Clean the laser optic with a soft, dry
brush.
• Looking into the laser outlet (14) with
optical instruments, e.g., a magnifying
glass, from a distance within 100 mm
may lead to damage to the eyes.
• Caution – if equipment is used that
does not match the described operat-
ing equipment or any another proce-
dures are executed, this may lead to
hazardous radiation exposure.
Meanings of the safety symbols
Read the operating instruc-
tions!
Voluntary „geprüfte Sicher-
heit" seal of quality (tested
safety)
Power tool of protection
class II (double shielded)
Connection for dust
extractor
Maximum cutting depth in
wood
Device meets the valid EU
regulations
Important! Wear safety
goggles!
Important! Wear ear
protection!
5453400-Bedien-2008.indd 45 5453400-Bedien-2008.indd 45
Important! Wear a breathing
mask!
Caution laser radiation.
Do not look into the beam
Do not dispose of with
household waste!
BJ Year of construction
SN: Serial number
SN: XXXXX The first two underlined
numbers give the month of
manufacture.
Additional symbols and the associated
explanations as used in the text of these
instructions.
7 – Installation and setting
CAUTION! Assembly and adjust-
ment tasks may only be carried
out with the tool at a standstill and
unplugged!
Electronic stroke rate control/stroke
rate selection (Figure 1a)
In order to saw in accordance
with the requirements of the
material, use the adjustment
wheel (1) to select a suitable stroke rate
1–6 (0–3000 min -1 ) and achieve this
using the On/Off switch. The adjustment
wheel also serves to implement stepless
adjustments of the stroke rate during
operation.
Saw blade change
The machine has a quick change system
(11) that can be used to change the saw
blade without tools.
45
18.08.20 15:01 18.08.20 15:01