Device-Specific Safety Information For Jigsaws - Meister MPS800-1 Traduction Du Manuel D'utilisation Original

f Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to
bind and are easier to control.
g Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking into
account the working conditions and
the work to be performed. Use of
the power tool for operations different
from those intended could result in a
hazardous situation.
h Keep handles and grips dry, clean,
and free from oil and grease. Slip-
pery handles and grips do not enable
safe handling and control of the
power tool in the event of unexpected
situations.
5 Service
a Have your power tool serviced by a
qualified repair person using only
identical replacement parts. This
will ensure that the safety of the
power tool is maintained.
b To avoid hazards, damaged power
leads must be replaced by the manu-
facturer or his customer service rep-
resentative.
6 – Device-specific safety
information for jigsaws
• Hold the device by the insulated
handle surfaces only when carrying
out tasks during which it is possible
that the tool will come across hid-
den power cables or its own cable.
Touching a live electrical line may
also energize metallic device parts
and cause an electric shock.
44
5453400-Bedien-2008.indd 44 5453400-Bedien-2008.indd 44
• Fasten and secure the workpiece to a
stable base using clamps or other
means. If you hold the workpiece only
with your hand or against your body,
it will remain unstable, which can lead
to loss of control.
• Changing the saw blade and making
settings to the saw shoe may only be
carried out when the unit is
unplugged.
• To fix the adjustment wrench to the
unit, only use the integrated holder.
• The saw blade must be locked tight
into the holder. Check, at regular
intervals, that it is seated firmly.
• The saw shoe must lie firmly across
the entire surface.
• Do not process materials that contain
asbestos.
• Wood dust and materials containing
fibres may be hazardous to health.
For this reason, always work with a
dust protection mask and with the
dust extractor switched on.
• Anybody else in the vicinity should
thus also wear a dust mask.
• If the power cable is damaged, do not
continue to the use the machine.
Safety notes for the laser marking aid
CAUTION! Do not look at the
laser beam!
• Never point the laser beam towards
people or animals.
• Never use the laser beam on very
reflective materials. There is a risk
posed by the reflected light.
18.08.20 15:01 18.08.20 15:01