Installation And Setting - Meister PS600M Traduction Du Manuel D'utilisation Original

• Before carrying out any work on the
machine, always pull the plug out of
the socket.
• Do not leave tool keys inserted.
• Observe the general safety instruc-
tions with regard to operating power
tools.
• If connection cables are damaged,
they must – in order to reduce the
risks – be replaced by the manufactur-
er or by their customer service repre-
sentative.
Meanings of the safety symbols
Read the operating
instructions!
Voluntary "geprüfte Sicherheit"
seal of quality (tested safety)
Power tool of protection class
II (double shielded)
Connection for dust extractor
Maximum cutting depth in
wood
max. 65 mm
Device meets the valid EU
regulations
Important! Wear safety
goggles!
Important! Wear ear
protection!
Important! Wear a breathing
mask!
Do not dispose of with
household waste!
5403120-Pendelhubstichsaege_man.indd 39 5403120-Pendelhubstichsaege_man.indd 39
BJ Year of construction
SN: Serial number
SN: XXXXX The first two underlined
numbers give the month of
manufacture.
7 – Installation and setting
Pendulum
The adjustable pendulum move-
ment (P) of the saw blade (0 for
hard materials, up to 3 for soft
0 I II
materials) improves the adjustment of
the machine to the material being pro-
cessed. And at the same time, it reduces
wear on the saw blade, improves the
rejection of shavings and considerably
reduces the formation of heat caused by
friction.The activation of the pendulum
function may also be carried out when
the machine is already running.
Recommendations regarding the machine
settings can be found on Figure 4.
Inserting the saw blade
CAUTION! Unplug from the power
source.
Loosen both of the holding screws
on the saw blade holder (10) using
the hexagonal wrench (11) (Figure 2).
Slot the saw blade into the groove and
push it in as far as it will go, ensuring
that the spine fits well into the groove of
the guide roll (8). Tighten the holding
screws up again.
Dust removal
The extraction hose of the house-
hold vacuum should
be fitted to the extraction open-
ing (4) on the jigsaw or to the supplied
adapter (12). Push this, along with the
39
17.07.20 06:58 17.07.20 06:58