Components; Correct Use - Meister MPS800-1 Traduction Du Manuel D'utilisation Original

3 – Components
1 Stroke rate pre-selection
(adjustment wheel)
2 Locking button
3 On/Off switch
4 Connection cable
5 Connection for dust extractor
6 Selection switch for dust blower
function
7 Saw shoe with plastic sliding plate
8 Cutting angle setting
9 Pendulum
10 Guide roller
11 Saw blade holder with quick change
system
12 Cut protection guard
13 Protective bar
14 Laser marking aid/laser optic/LED
working light/Laser outlet (Figure 6)
15 On/Off switch for laser marking aid
and LED working light
16 Adapter for external dust extractor
17 Saw blade
18 Hexagonal wrench
19 Parallel stopper
4 – Correct use
This jigsaw is suitable for sawing wood,
metals with special saw blades (not
included in the scope of delivery), ceram-
ics, plastics and fibre-boards within the
specified cutting performances and with
the appropriate accessories (see the
manufacturer specification!). All other
uses are expressly excluded.
This unit is designed for private use only.
This device is not designed to be used
by people (including children) with lim-
ited physical, sensory or mental capac-
ities or those without experience and/
or knowledge. Children should be
supervised to ensure that they do not
play with the device.
5453400-Bedien-2008.indd 41 5453400-Bedien-2008.indd 41
Improper use of the product
All applications carried out with the
device that are not listed in the „Correct
use" chapter will be considered improp-
er use.
The unit may not be used for the follow-
ing purposes:
• Sawing firewood
• Processing materials containing asbes-
tos or other hazardous substances
• Use as a transportable or stationary unit
There is a risk of injury.
The user of the device is liable for all
property and personal damages occur-
ring as the result of incorrect use.
If other components or non-original
components are used with the machine,
the manufacturer guarantee is voided.
Remaining risks
Even when the device is used properly,
there is a residual risk that cannot be
excluded. The following potential dan-
gers are inherent in the type and con-
struction of the device:
• Contact with the unprotected part of
the saw blade (cuts)
• Contact with flying parts of a saw
blade in the event that it breaks (cuts)
• Kickback from flying workpiece parts
(bumps)
• Loss of hearing if the required ear
defenders are not used during work
(loss of hearing)
41
18.08.20 15:01 18.08.20 15:01