1. Drive select lever
a. L (Low)
b. H (High)
c. N (Neutral)
d. R (Reverse)
e. P (Park)
1. Levier de présélection
a. L (Rapport inférieur)
b. H (Rapport supérieur)
c. N (Point mort)
d. R (Marche arrière)
e. P (Stationnement)
1. Palanca de selección de marcha
a. L (Baja)
b. H (Alta)
c. N (Punto muerto)
d. R (Marcha atrás)
e. P (Estacionamiento)
2. Shifting: Neutral to Reverse and Reverse
to Park
NOTE:
The drive select lever cannot be shifted into or
from reverse or park without applying the rear
brake.
a. Bring the machine to a complete stop and
return the throttle lever to the closed posi-
tion.
b. Apply the rear brake pedal.
c. Shift from neutral to reverse or from re-
verse to park and vice versa by moving
the drive select lever along the shift guide.
NOTE:
When in reverse, the reverse indicator
light should be on. If the light does not
come on, ask a Yamaha dealer to inspect
the reverse indicator light electrical circuit.
Due to the synchronizing mechanism in
the engine, the light may not come on un-
til the ATV starts moving.
6-13