Doro Secure 347 Mode D'emploi page 13

1 Pairing button for cordless
alarm unit
2 Socket for external alarm unit
3 Call Back
4 Flash
5 Telephone cord socket
6 Stop button/alarm off
7 Recording alarm message
8 Storing speed dial/number list
9 Socket for power supply
10 Cordless alarm unit
11 Speaker volume
12 Alarm button
Connection
1. Connect the spiral cord to the socket on the handset and to
the socket.
q
2. Connect the mains adapter to the mains socket and to the
POWER socket
3. Insert the batteries (see Batteries).
4. Set correct Recall button time to 100 (see Technical
Information).
5. Connect the telephone cord to the network wall socket and to
the socket marked
6. Lift the handset and listen for the dial tone.
7. The alarm button
the alarm function is set. See Alarm Function.
English
13 Speed dial
14 Handset volume
15 Ringtone switch
16 Speaker button
17 Ringtone indicator
18 Network LED
19 Battery LED
20 Keypad
21 Socket for handset cord
22 Microphone
23 Alarm signal/Flashtime
24 Batteries
.
y
on the telephone.
T
will flash alternately green and red until
2
switches