Safety Precaution - Efco MT 2600 Manuel D'utilisation Et D'entretien

Masquer les pouces Voir aussi pour MT 2600:
Table des Matières

Publicité

WARNING - If correctly used, the chainsaw is a
quick, easy to handle and efficient tool; if used
improperly or without the due precautions it
could become a dangerous tool. For pleasant
and safe work,always strictly comply with the
safety rules that follow and throughout this
manual.
WARNING: The ignition system of your machine
produces an electromagnetic field of very low
intensity. This field could interfere with certain
pacemakers. To reduce the risk of serious or fatal
injury, persons with pacemakers should consult
their doctor or the manufacturer of the
pacemaker before using this machine.
Chain saw for tree service
Specialized chain-saw of limited weight designed for
use by a trained and competent operator for pruning
and dismantling standing tree crowns.
Trained operator person who has competence and
knowledge in:
-
the use and particular hazards associated with using
a chain-saw (for tree service work) manufactured in
accordance with the requirements of ISO 11681-2
and,
-
the precautions to be taken to limit these hazards
including the wearing of the recommended
personal protective equipment (PPE).
WARNING: – National regulations could limit use
of the machine.
1 -
Do not use the chainsaw until you have completely
urderstood the specific operating methods. First
time users must familiarize themselves thoroughly
English
SAFETY PRECAUTIONS
with the operation of the machine before working
in the field.
2 -
The chainsaw must only be used by adults in good
physical condition with knowledge of the operating
instructions.
3 -
Do not use the chainsaw when you are physically
tired or if you have taken alcohol, drugs, or
medication (Fig. 1).
4 -
Never wear scarves, bracelets or anything else
which could be taken up by the machine or chain.
Wear close-fitting safety clothing (look pag. 12-13).
5 -
Wear protective non-slip safety shoes, gloves,
glasses, ear protection and safety helmet
(look pag. 12-13).
6 -
Never allow bystanders to remain within your
working area when starting or cutting with the saw
(Fig. 2).
7 -
Do not start cutting until you have a clear work
area. Do not cut near electric cables.
8 -
Always cut from a firm-footed and safe position
(Fig. 3).
9 -
Only use the chainsaw in well-ventilated places, do
not operate the chainsaw in explosive or flammable
atmospheres or in closed environments (Fig. 4).
10 -
Never touch the chain or attempt to service the
saw while the engine is running.
11 -
It is prohibited to fit any device other than that
supplied by the manufacturer.
12 -
All labels with health hazards must be kept in good
conditions. In case of damage or deterioration,
immediately substitute them (see pag.4).
13 -
Do not utilize the machine for uses different from
the ones specified in the manual (see pag. 38).
14 -
Never leave the machine unattended with the
engine running.
15 -
Check the chainsaw each day to ensure that each
device, whether for safety or otherwise, is
functional.
16 -
Always follow the manufacturer's instructions for
the maintenance operations.
17 -
Never use a damaged, modified, or improperly
repaired or assembled chainsaw. Do not remove,
damage or deactivate any of the safety devices.
Only use bars of the length indicated in the table.
18 -
Never carry out operations or repairs on your own
that are other than routine maintenance. Call
specialised and authorised workshops only.
19 -
Never start up the chainsaw without the chain
cover fitted.
20 -
If your chainsaw is no longer usable, dispose of it
properly without damaging the environment by
handing it in to your local Dealer who will arrange
for its correct disposal.
21 -
Only loan your saw to expert users who are
completely familiar with saw operation and correct
use. Give other users the manual with operating
instructions, which they should read before using
the saw.
22 -
All saw service, other than the operations shown in
the present manual, should be performed by
competent personnel.
23 -
Keep this manual on hand and consult it before
each use of the tool.
24 -
Please note that the owner or the user is
responsible for any accidents or damage to third
parties or their property.
7

Publicité

Table des Matières
loading

Table des Matières