Hookups
pWhen making analog hookups
When connecting an audio cord, be sure to match the
colour-coded cord to the appropriate jacks on the
components: Red (right) to Red and White (left) to
White. Be sure to make connections firmly to avoid
hum and noise.
CD player
FIXED
VARIABLE
L
L
R
R
ANALOG OUT
• If you have an analog power amplifier
Connect the amplifier via the ANALOG OUT (VARIABLE)
jacks using the supplied audio cord. Be sure to set the
DIGITAL OUT ON/OFF switch to OFF (the factory setting)
when you make this connection. You can adjust the output
level with the ANALOG OUT/PHONE LEVEL control on
the player or the ANALOG OUT LEVEL buttons on the
remote.
CD player
FIXED
VARIABLE
L
L
R
R
ANALOG OUT
pWhen making digital hookups
You can prevent deterioration of the signal during
transmission, since the music signal output through
the digital output connectors retains digital form.
You can connect a digital component such as a
digital amplifier, D/A converter, DAT, or MD. When
you connect a DAT or MD, you can make digital
recordings from CDs.
Be sure to set the DIGITAL OUT ON/OFF switch to
ON when you make this connection.
Note that you cannot use the fade in/out function
(page 18) when making this connection.
• If you have a digital component with an optical digital
input connector
Connect the component via the DIGITAL OUT (OPTICAL)
connector using the optical cable (not supplied). Take off
the cap and plug in the optical cable.
Amplifier
CD
L
R
• If you have a digital component with a coaxial digital
INPUT
input connector
Connect the component via the DIGITAL OUT (COAXIAL)
connector using the coaxial cable (not supplied).
Amplifier
CD
Note
L
When you connect via the DIGITAL OUT connector, noise
R
may occur when you play CD software other than music, such
as a CD-ROM.
INPUT
Connecting the mains lead
Connect the mains lead to the mains.
Removing the notice sheet
Remove the notice sheet from the player before using.
Getting Started
CD player
OPTICAL
COAXIAL
ON
OFF
DIGITAL OUT
CD player
OPTICAL
COAXIAL
ON
OFF
DIGITAL OUT
Digital component
OPTICAL
DIGITAL IN
Digital component
COAXIAL
DIGITAL IN
5
GB