Getting Started; Unpacking; Inserting Batteries Into The Remote; Hooking Up The System - Sony CDP-XA555ES Mode D'emploi

Getting Started

Unpacking

Check that you received the following items:
• Audio connecting cord (1)
• Remote commander (remote) (1)
• R6 (size AA) batteries (2)
• Stabilizer (1)

Inserting batteries into the remote

You can control the player using the supplied remote.
Insert two R6 (size AA) batteries by matching the +
and – on the batteries to the diagram inside the battery
compartment.
Insert the negative (–) end first, then push in and down
until the positive (+) end clicks into the position.
When using the remote, point it at the remote sensor g
on the player.
When to replace batteries
With normal use, the batteries should last for about six
months. When the remote no longer operates the player,
replace all the batteries with new ones.
Notes
• Do not leave the remote near an extremely hot or humid
place.
• Do not drop any foreign object into the remote casing,
particularly when replacing the batteries.
• Do not expose the remote sensor to direct sunlight or
lighting apparatuses. Doing so may cause a malfunction.
• If you don't use the remote for an extended period of time,
remove the batteries to avoid possible damage from battery
leakage and corrosion.
GB
4

Hooking Up the System

Overview
This section describes how to hook up the CD player to
an amplifier. Be sure to turn off the power of each
component before making the connections.
DIGITAL OUT
(OPTICAL)
ANALOG OUT
FIXED
ANALOG OUT DIGITAL OUT
(VARIABLE) ON/OFF
CD
: Signal flow
What cords will I need?
pWhen making analog hookups
• Audio cord (supplied) (1)
White
(L)
Red
(R)
pWhen making digital hookups
• Optical cable (not supplied)
• Coaxial cable (not supplied)
DIGITAL OUT
(COAXIAL)
CD player
To mains
Amplifier
To mains
White
(L)
Red
(R)