Specifications - Shindaiwa T335TS Manuel D'utilisation

External dimensions:
Length × Width × Height
Mass:
Unit without fuel, cutting attachment and guard (ISO11806)
Unit with fuel, specified cutting attachment, guard and harness
Volume: Fuel tank
Cutting attachment:
Nylon line cutting head
Line diameter
Line length
Thread
Gear ratio: Gear ratio and lubrication
Rotational direction of output shaft seen from above:
Engine:Type
Engine displacement
Maximum shaft brake power, measured in accordance with ISO 8893
Engine speed at maximum engine power
Recommended engine idling speed
Carburettor
Ignition
Spark plug
Starter
Clutch
Fuel:
Oil
Ratio
Fuel consumption at maximum engine power
Specific fuel consumption at maximum engine power
Vibration levels: (ISO 22867)a
Measured sound power level: (ISO 22868) L
Guaranteed sound power level:(ISO 22868) L
These specifications are subject to change without notice.
hv,eq
WA
WA

Specifications

T335TS
1816 × 340 × 304 mm
6.6 kg
8.0 kg
Z5
3.0mm
5 m ×1 line
Left-handed M10×1.25
2.07 reduction and good quality lithium grease
Air cooled 2-stroke single cylinder
3
30.5 mL (cm )
1.04 kW
7000 r/min
2800 r/min
Diaphragm type
Flywheel magneto - TCI system
NGK BPMR8Y
Recoil starter
Automatic centrifugal clutch
Regular grade petrol. Minimum 89 Octane unleaded
petrol is recommended. Do not use fuel containing
methyl alcohol or more than 10 % of ethyl alcohol.
Two stroke, air-cooled engine oil. ISO-L-EGD Stand-
ard (ISO/CD 13738), JASO FC,FD grade and Shin-
daiwa One 50: 1 oil.
50: 1 (2%)
0.59 L/h
416 g/(kW•h)
Front handle 4.2 m/s
Rear handle 3.3 m/s
103 dB(A)
106 dB(A)
29
Specifications
C335TS
1816 × 667 × 458 mm
6.8 kg
8.7 kg
0.84 L
Anticlockwise
2
Left handle 2.2 m/s
2
Right handle 1.9 m/s
102 dB(A)
105 dB(A)
2
2