Specifications - Shindaiwa T310S Manuel D'utilisation

Specifications

External dimensions:
Length × Width × Height
Mass:
Unit without fuel, cutting attachment and guard (ISO11806)
Unit with fuel, specified cutting attachment, guard and harness
Volume: Fuel tank
Cutting attachment:
Nylon line cutter type
Nylon cord size(dia)
Nylon cord length
Thread
Gear ratio: Gear ratio and lubrication
Rotational direction of output shaft seen from above:
Engine:Type
Engine displacement
Maximum shaft brake power, measured in accordance with ISO 8893
Engine speed at maximum engine power
Maximum engine speed
Recommended engine idling speed
Carburettor
Ignition
Spark plug
Starter
Clutch
Fuel:
Oil
Ratio
Fuel consumption at maximum engine power
Specific fuel consumption at maximum engine power
Vibration levels: (ISO 22867)ahv,eq
Sound pressure level: (ISO 22868) LpAeq
Guaranteed sound power level:(ISO 22868) L
These specifications are subject to change without notice.
Specifications
1792 × 371 × 330 mm
6.0 kg
7.9 kg
0.75 L
Speed Feed 450
2.4 mm
6 m
Left-handed M8×1.25
1.4 reduction and good quality lithium grease
Anticlockwise
Air cooled two stroke, single cylinder
28.9 mL (cm
1.0 kW
8000 r/min
9800 r/min
2750 r/min
Diaphragm type
Flywheel magneto - CDI system
NGK BPMR6A
Recoil starter
Automatic centrifugal clutch
Regular grade petrol. Minimum 89 Octane unleaded
petrol is recommended. Do not use fuel containing me-
thyl alcohol or more than 10 % of ethyl alcohol.
Two stroke, air-cooled engine oil. ISO-L-EGD Standard
(ISO/CD 13738), JASO FC,FD grade and shindaiwa
50:1 oil.
50:1 (2%)
0.71 L/h
496 g/(kW•h)
Front handle 6.6 m/s
Rear handle 7.4 m/s
98 dB(A)
114 dB(A)
WA
32
T310S
1792 × 573 × 500 mm
6.5 kg
8.4 kg
3
)
2
Left handle 4.4 m/s
2
Right handle 3.9 m/s
98 dB(A)
114 dB(A)
C310S
2
2