Panasonic Technics SU-G700M2 Mode D'emploi page 31

■
GENERAL
AC 220 V to 240 V,
Power supply
50/60 Hz
Power
95 W
consumption
Power
consumption in Approx. 0.5 W
standby mode
Dimensions 430 mm × 148 mm ×
(W×H×D) 428 mm
Mass Approx. 12.6 kg
Operating
0 °C to 40 °C
temperature range
35 % to 80 % RH
Operating humidity
range
(no condensation)
■
AMPLIFIER SECTION
70 W + 70 W
(1 kHz, T.H.D. 0.5 %, 8 ,
20 kHz LPF)
Output power
140 W + 140 W
(1 kHz, T.H.D. 0.5 %, 4 ,
20 kHz LPF)
4  - 16 
Load impedance
Frequency
response
20 Hz to 20 kHz
PHONO
(RIAA DEVIATION ±1 dB,
(MM/MC)
8 )
5 Hz to 80 kHz
LINE
(-3 dB, 8 )
5 Hz to 90 kHz
DIGITAL
(-3 dB, 8 )
Input sensitivity/
Input impedance
PHONO (MM) 2.5 mV / 47 k
300 uV / 100 
PHONO (MC)
LINE 200 mV / 22 k
• If you download and install the dedicated app, you can play back files in wide-ranging formats. ( 15)
For details, refer to the operating instructions of the app.
• Playback of all formats supported by this unit is not guaranteed.
• Playback of a format not supported by this unit may cause choppy audio or noise. In such cases, check to
see if this unit supports the format.
• File information (sampling frequency, etc.) shown by this unit and playback software may differ from each
other.
Note
• Specifications are subject to change without notice.
• Mass and dimensions are approximate.
• DSD is a trademark of Sony Corporation.
■
TERMINALS SECTION
Stereo, 6.3 mm
Headphones Jack
0.75 mW, 32 
REAR USB
PC
Type B Connector
LINE IN ×2 (Pin Jack)
Analogue input
PHONO (MM/MC),
(Pin Jack)
OPT IN ×2
(Optical terminal)
Digital input
COAX IN ×2 (Pin Jack)
Format support LPCM
LINE OUT (Pin Jack)
Analogue output
PRE OUT (Pin Jack)
System port
  3.5 mm, Jack
System control
■
FORMAT SECTION
USB-B
USB 2.0 high-speed
USB Standard
USB Audio Class 2.0,
Asynchronous mode
Format support
32, 44.1, 48, 88.2,
96, 176.4, 192, 352.8,
PCM
384 kHz/
16, 24, 32 bit
DSD 2.8, 5.6, 11.2 MHz
ASIO Native mode,
DSD control mode
DoP mode
Specifications
Others
(31)
31