Operating Instructions; Audible Beep Confirmation; Playing Source Selection - Audiovox VME 9415 Mode D'emploi

OPERATING INSTRUCTIONS

Power On / Off
Press the /SRC button on the front panel to turn the unit on. You can also turn on
the unit by pressing the OPEN button and opening the TFT screen.
Press and hold the /SRC button on the front panel to power off the unit. The
monitor is drawn back into the main compartment.

Audible Beep Confirmation

An audible beep tone confirms each function selection. The Beep tone can be
disabled through the Setup menu.
Mute/Line Mute
Press the rotary encoder MUTE button on the front panel to mute the volume. The
mute symbol is displayed on the TFT screen.
Press the rotary encoder button again to restore the volume. Adjusting the volume or
using any of the audio setup features cancels the mute function.
If the "MUTE" wire is connected, audio output mutes when a telephone call is
received by a mobile phone.

Playing Source Selection

When the monitor is closed, press the SRC button on the front panel to change
between available audio playing sources in the following order: RADIO, DISC, USB1,
USB2, BT, NAV, AUX, and CAMERA. The source is displayed on the LCD screen.
80