Audiovox VME 9415 Mode D'emploi page 77

1� CLOSE/OPEN
Press to activate the automatic mechanical system and move the TFT monitor into
the viewing position. Press again to close the TFT.
2� PIC/BAND
With the monitor open, press PIC to adjust the Brightness and Contrast (see
"Image/Display Settings").
With the monitor closed, press BAND to change between three FM and two AM
bands.
3� TFT Display
4� WIDE/
With the monitor open, press WIDE to adjust the display aspect of the picture to
one of two settings: Full or STANDBY.
With the monitor closed, press
5� TILT/
With the monitor open, press TILT to activate the tilt function. Use the rotary
encoder to make adjustments while the blue tilt icon is flashing.
With the monitor closed, press
6� EJECT
Press to eject a disc. Press and hold to reset the core mechanism position.
7� USB Interface Connector
Insert a USB device for playback of music/video files.
8� A/V Input
Attach a compatible A/V device.
9� DISC SLOT
10� LCD Display
11� / SRC
Press to turn the unit on. Once the unit is on, momentarily pressing the SRC
button will display the Main Source Menu.
Press and hold to turn the unit off.
12� Rotary Encoder
Rotate to adjust the volume. Press to activate the MUTE function and silence the
receiver. Press again to resume sound.
While in tuner mode, press and hold to activate the LOC feature. Repeat to
deactivate.
13� RESET
Press to reset the system settings to factory default (except the password setting).
14� DISP
With the monitor open, during DVD playback, press once to view Time, Title,
Chapter info or twice for Audio, Subtitle, Angle, and Bit Rate info.
With the monitor closed, press to view alternate LCD display information.
to seek backward.
to seek forward.
77