Ipod/Iphone Operation; Accessing Ipod Mode - Audiovox VME 9415 Mode D'emploi

iPod/ iPhone OPERATION
This unit is Made for iPod and iPhone. You can control your iPod and iPhone via the
touch screen to access Playlist, Artist, Albums, Songs, etc. Supported models include,
but are not limited to the following:
• iPhone 4S / 4 / 3GS /
• iPodtouch 5th and 4th Generation
• iPod nano 6th and 5th Generation
• iPod classic
NOTE: Be sure your iPod has the latest Apple firmware installed to avoid
connectivity issues.
Opening/Closing the TFT Monitor
Open TFT Monitor
Press the OPEN button on the front panel to activate the mechanism that moves the
display panel into the viewing position.
Close TFT Monitor
Press the OPEN button on the front panel to load the display panel back into the
compartment.

Accessing iPod Mode

The unit will automatically switch to iPod mode when an iPod, iPod touch or iPhone is
plugged into the front or rear USB connector.
NOTE: For basic iPod connectivity, you can use the white 30-pin to USB iPod
cable that came with your Apple device.
To return to the iPod menu from any other source menu, touch SRC on the front panel
until the iPod menu appears on the screen, or choose the iPod icon from the source
menu (only available when an iPod or iPhone is connected to the USB connector).
118