Inset Rack - NEFF B 1452 J0 Mode D'emploi

Inset rack

Removing
You can remove the inset racks for cleaning.
1.
At the front, press the rack up and take it off.
2.
At the back, pull the rack forward and take it off.
Clean the rack using washing-up liquid and pan
scrapers or brushes.
Replacing
The racks fit on the left and right side.
The indentation (a) must always be at the
bottom.
1.
At the back, put the rack in as far as it goes.
2.
Push the rack back.
3.
Insert the front of the rack as far as it will go.
4.
Push the rack down.
73