Checking, correcting and
cancelling settings
Note
Special functions
Masking out the display
Rapid heating
Setting the time
Dimming the display
54
4.
The oven is automatically switched on and off at
the preset times (e.g.
5.
When the time has elapsed, a signal is emitted
and the
symbol flashes. To stop the signal,
!
press the
button.
>
6.
Switch the oven off.
7.
To end automatic mode, press the
1.
To check your settings, press the
until the symbol flashes.
2.
If required, correct the settings with the rotary
knob.
3.
If you want to cancel your settings, turn the set
0:00
time back to
The automatic timer is best used with dishes which
require little attention.
The minute timer and OFF time can be pre-
programmed up to a max. 24 hours.
The settings can be displayed at any time by
pressing the
button.
>
1.
Press the
button for 7 seconds.
>
The display then goes blank and the time
continues running in the background.
2.
To switch on the display, briefly press the
button.
>
s
Rapid heating
can be set with the clock
(see section "Switching the oven on and off").
See section "Before using your appliance for the first
time".
Between 22.00 and 6.00 the display is automatically
dimmed.
11:00
12:30
and
>
button
>
and switch the oven off.
).
button.