Inset Rack - NEFF B 14H5 Série Mode D'emploi

Inset rack

Removing
You can remove the inset racks for cleaning.
1.
At the front, press the rack up and take it off.
2.
At the back, pull the rack forward and take it off.
Clean the rack using washing-up liquid and pan
scrapers or brushes.
Replacing
The racks fit on the left and right side.
When installing the insert racks, do not
twist them, otherwise the shelf positions for the
accessories will not correspond.
The extension (a) must always be at the top.
1.
At the back, put the rack in as far as it goes.
2.
Push the rack back.
3.
Insert the front of the rack as far as it will go.
4.
Push the rack down.
77