Control And Adjustment Of The Temperature; Cabinet Loading; Defrosting And Water Drainage - Arneg Barcellona Manuel D'installation Et De Service

Before
connected
• consult the wiring diagrams annexed to the cabinet
• make sure that the rating plate data matches the characteristics of the elec-
• check that power supply voltage is the one reported on the rating plate.
• remove all metallic objects worn: rings, watches, bracelets, earrings, etc.
• proceed with wiring
If the electrical supply is interrupted, the electrical equipment of the shop will not restart,
triggering the overload protection devices; modify the system to differentiate the enable-
ment of the various devices.

15. Control and adjustment of the temperature

The cooling temperature is controlled by means of:
- digital solar-powered thermometer (Fig.11)
- the electronic controller (optional) (Fig.10): the controller is set in the factory during testing. To
change the set parameters, contact the manufacturer.
If the thermostat is powered by batteries:
- replace the discharged batteries with similar ones
- do not dispose of batteries in the environment
- consign the batteries to authorized collection centres

16. Cabinet loading

max allowed capacity evenly distributed of tray: 300 kg/m
max allowed capacity evenly distributed of shelves: 40 kg/m
max. allowed capacity evenly distributed on glass shelves: 40 kg/m
• arrange the goods in an orderly and uniform fashion
Remedy
• respect the loading line
• leave a 30 mm clearance between the goods and the top shelf
• introduce products already cooled at the required storage temperature
• load the cabinet so that the goods from a longer time is sold before the
• on bent shelves, always use retainers
DO NOT obstruct/impede the flow of cooled air
What to avoid
NEVER exceed the loading line
NEVER introduce heated products
DO NOT obstruct the area in front of the cabinet
DO NOT obstruct the inlet of cooled air with: goods, price tags, price holders,
decorations etc.
Arrange the goods without leaving empty spaces, to improve cabinet performance
The inflow of warm air into the cabinet is inevitable; if a thin layer of frost builds up due to
high humidity, keep the doors closed for 2 hours.
It is the Client's responsibility to ensure that all operations are carried out safely and in ac-
cordance with the norms in force

17. Defrosting and water drainage

Barcellona is supplied with a simple-stop defrost system.
05060169 00 04-08-2017
DANGER! Live parts. Short circuit Electrocution
Check that the attachments of the lighting systems (floors, roof, ceil-
ing) are properly inserted and locked into their housings to avoid
disconnections during cleaning and maintenance operations, that may
cause harmful electric shocks.
trical system to which the cabinet must be attached.
newly received goods (stock rotation)
Barcellona
(Fig.12)
2
(Fig.12)
2
(Fig.12)
2
English
39