Add/Change/Delete Users; Deactivate/Activate Installer Access - Abus IPCB42500 Manuel Utilisateur Logiciel

6.1 Add/change/delete users

Add/edit/delete:
User name:
Language:
Use a secure password:
Password/confirm:

6.2 Deactivate/activate installer access

Block user "Installer":
If the "Master" or "Installer" user has forgotten their login information, you must load
the factory settings for the camera via the "RESET" button. This will restore all
usernames and passwords to factory settings.
Users with the type "User" can be added. The "Master"
user can only be modified. It cannot be added.
Enter the user names here (max. 32 characters, not
allowed: \ : ").
Select the language to be displayed for the user here.
In order to become active, the password must meet the
following requirements: 8-16 characters, 2x numbers,
2x lower-case letters, 2x upper-case letters, 2x special
characters
Enter and confirm the password here.
The "Master" user can block installer access (="Installer" user)
when the installation has finished. Access can be activated
again, if required.
74