Maintenance And Service; Maintenance And Cleaning; After-Sales Service And Application Service - Bosch GHO 40-82 C Professional Notice Originale

16 | English
Chamfering edges (see figure H)
The V-grooves in the front of the planer base plate enable
quick and easy chamfering of workpiece edges. Select the V-
groove that corresponds to your chamfering width. Then po-
sition the planer with the V-groove onto the edge of the
workpiece and guide it along.
Groove used
None
Small
Medium
Large
Planing with the parallel/angle guide (see figures D–F)
Attach the parallel guide (21) or the angle guide (24) to the
power tool with the fastening screw (23). Depending on the
application, attach the rebate depth guide (27) to the power
tool with the fastening screw (26).
Loosen the locking nut (22) and set the desired rebate
width. Retighten the locking nut (22).
Set the desired rebate depth accordingly using the rebate
depth guide (27).
Carry out the planing procedure several times until the de-
sired rebate depth has been achieved. Guide the planer with
sideways contact pressure.
Chamfering with angle guide
Use the angle setting (25) to
set the necessary helix angle
when chamfering grooves
and surfaces.
Planer blade/key compartment
In the planer blade/key compartment (3), you can store a
planer blade (16) and a hex key (18) as shown in the illus-
tration. To remove the compartment contents, pull the
planer blade/key compartment (3) completely out of the
planer.
(3)
Service station (see figure I)
The service station (29) in the case can be used as a mount-
ing fixture for the planer, e.g. for changing the blade.
1 609 92A 4LG | (19.02.2019)
u

Maintenance and Service

Maintenance and cleaning

Dimension a
u
(mm)
0–5.7
u
1.9–7.6
4.7–10.3
Keep the parking rest (28) clear and clean it regularly.
5.9–11.6
In order to avoid safety hazards, if the power supply cord
needs to be replaced, this must be done by Bosch or by an
after-sales service centre that is authorised to repair Bosch
power tools.

After-Sales Service and Application Service

Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
(18) (16)
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Do not use the service station for stationary operation
of the planer.
Pull the plug out of the socket before carrying out any
work on the power tool.
To ensure safe and efficient operation, always keep
the power tool and the ventilation slots clean.
Bosch Power Tools