7: Operating The Receiver Using The Gui (Graphical User Interface) - Sony STR-DA3300ES Mode D'emploi

1
Press ?/1 while pressing RM SET UP.
The RM SET UP button flashes.
2
Press 1 or 2 while the RM SET UP
button is flashing.
When you press 1, the command mode is
set to AV SYSTEM 1. When you press 2,
the command mode is set to AV SYSTEM
2.
3
Press ENTER when the RM SET UP
button lights up.
The RM SET UP button flashes twice, then
the command mode setting process is
completed.
Tip
When you press RM SET UP, use a thin wire, such
as a paper clip.
To switch the command mode
of the RM-AAU018 remote
DISPLAY
MUTING
Press and hold DISPLAY, then press
MUTING and at the same time.
38
GB
7: Operating the receiver
using the GUI
Interface)
By using the GUI menu, you can make various
settings and adjustments.
Displaying the GUI menu on the
TV screen
4
1
Connect a TV monitor to this
receiver.
Refer to "3: Connecting the monitor"
(page 19).
2
Turn on the receiver and the TV.
3
Press AMP to enable receiver
operation.
(Graphical User
2
3
AMP
MENU
5
4