Sony STR-DA3300ES Mode D'emploi page 12

Name Function
I Numeric Press to
– preset/tune to preset stations.
buttons
– select track numbers of the
– select channel numbers of
– After pressing TV (e;),
J ENTER Press to enter the value after
selecting a channel, disc or
track using the numeric buttons.
Press to store a station during
MEMORY
tuner operation.
K AMP MENU Press to display the menu to
operate the receiver.
L Press V/v/B/b to select the
menu items. Then press
enter the selection.
V/v/B/b
M OPTIONS Press to display and select items
from option menus for receiver
and DVD player, Blu-ray Disc
Player.
Press to display and select items
TOOLS
from the option menus for DVD
player or Blu-ray Disc Player,
etc.
N MENU Press to display the menu to
operate the audio/video
components.
Press SHIFT (wk), then press
SCREEN/
MENU to switch the display
DSPL
mode of the menu between
CONTROL
SCREEN (to display the menu
on the TV screen) and DSPL (to
display the menu in the display
window).
O CATEGORY Press to select the category for
satellite tuner (page 115).
+/–
12
GB
CD player, DVD player, Blu-
ray Disc Player or MD deck.
Press 0/10 to select track
number 10.
the VCR or satellite tuner.
press the numeric buttons to
select the TV channels.
Name
P m/M
a)
x
a)
X
a) b)
H
./>
CATEGORY
MODE
TUNING +/– Press to select station
Q PRESET
b)
+ /–
TV CH +/–
R F1/F2
to
MACRO1,
MACRO2
TV/INPUT
WIDE
RESOLUTION Press SHIFT (wk) then press
Function
a)
Press to operate the DVD
player, Blu-ray Disc Player, CD
player, MD deck, tape deck, or
component connected to the
a)
DIGITAL MEDIA PORT
adapter etc.
Press to select the category
mode for satellite tuner
(page 115).
(page 114).
Press to register FM/AM/
satellite tuner stations or to
select preset stations.
Press TV (e;), then press TV
CH +/– to operate the TV,
satellite tuner, VCR, etc.
Press TV (e;), then press F1 or
F2 to select a component to
operate.
• HDD recorder
F1: HDD
F2: DVD player, Blu-ray Disc
Player
• DVD/VHS combo player
F1: DVD player, Blu-ray Disc
Player
F2: VHS
Press AMP (6), then press
MACRO1 or MACRO2 to set
up the macro function
(page 122).
Press TV/INPUT and TV (e;)
at the same time to select the
input signal (TV input or video
input).
Press repeatedly to select the
wide picture mode.
RESOLUTION repeatedly to
change the resolution of signals
output from the HDMI OUT or
COMPONENT VIDEO
MONITOR OUT jack
(page 88).