Settings For The Video (Video Settings Menu); Settings For Hdmi (Hdmi Menu) - Sony STR-DA3300ES Mode D'emploi

Settings for the video
(Video settings menu)
You can use the Video settings menu to
reassign the component video input to another
input and to name inputs. Select "Video" in the
Settings menu. For details on adjusting the
parameters, see "7: Operating the receiver
using the GUI (Graphical User Interface)"
(page 38).
Video settings menu parameters
x Resolution
(Converting video signals)
Lets you convert the resolution of analog video
input signals.
• DIRECT
• AUTO
• 480i/576i
• 480p/576p
• 720p
• 1080i
• 1080p
For details on operating, see "In the video
input/output conversion table classified by the
menu settings" (page 34).
Settings for HDMI
menu)
You can use the HDMI menu to make the
required settings for components connected to
the HDMI jack. Select "HDMI" in the Settings
menu. For details on adjusting the parameters,
see "7: Operating the receiver using the GUI
(Graphical User Interface)" (page 38).
HDMI menu parameters
x HDMI Control
Lets you turn the components connected to the
HDMI jack using an HDMI cable on or off.
• ON
• OFF
Note
When you set "HDMI Control" to "ON," "HDMI
Audio" may be changed automatically.
x HDMI Audio
(Setting HDMI audio input)
Lets you set the HDMI audio signals output
from the playback component connected to the
receiver via an HDMI connection.
• TV+AMP
The sound is output from TV's speaker and
the speakers connected to the receiver.
Notes
• The sound quality of the playback component
depends on the TV's sound quality, such as the
number of channels, and the sampling frequency,
etc. When the TV has stereo speakers, the sound
output from the receiver is also stereo as that of
the TV, even if you play multi-channel source.
• When you connect the receiver to a video
component (projector, etc.), sound may not be
output from the receiver. In this case, select
"AMP."
• When you select the input that you have assigned
the HDMI input, sound does not output from the
TV.
• AMP
The HDMI audio signals from the playback
component is only output to speakers
(HDMI
continued
57 GB