Sony STR-DA4300ES Mode D'emploi page 33

Function for conversion of video
signals
This receiver is equipped with a function for
converting video signals. You can output the
video signal after connecting this receiver via
the MONITOR VIDEO OUT jack as shown in
the illustration.
In the video input/output conversion table of the receiver
Refer to "In the video input/output conversion table classified by the menu settings" (page 35) on
the conversion function of images.
A
OUTPUT jack
INPUT jack
HDMI IN 1/2/3 A
VIDEO IN B
COMPONENT
VIDEO IN C
a : Video signals are converted and output through the video converter.
f : The same type of signal as that of the input signal is output. Video signals are not converted.
X : Video signals are not output.
* Video signals are output when "Resolution" is set to "DIRECT" in the Video settings menu.
Input Signals
B
COMPONENT VIDEO
HDMI OUT
f
a
a
• Video signals can be output as HDMI video
and component video signals.
• Component video signals can be output as
HDMI video and video signals.
For details on the video converting function,
see "In the video input/output conversion table
classified by the menu settings" (page 35).
C
MONITOR OUT
X
a
a/f
Output Signals
BC
ABC
BC
MONITOR VIDEO OUT
X
a/f*
a
continued
33
GB