Installing The Handle - AVG VINOPAZZO VPB50SS Manuel D'utilisation

2. INSTALLATION INSTRUCTIONS (continued)
INSTALLING THE HANDLE
To install the handle, please follow these instructions:
1. Pull away the door gasket from the area where the handle is to be installed, on the left side, as
shown in Fig. 1. The gasket may be easily removed by hand, no tools are required.
2. Align the handle with the screws to be installed. Tighten the screws using a Phillips head
screwdriver until the handle sets both flush and secured tightly against the door frame. DO NOT
over‐tighten as this will cause damage to the handle assembly. Refer to Fig. 2. Replace the door
gasket in its original position.
22