Connections (Notifications); Antenna Connection; Pc Connection; Other Connections - LG 24LF4820 Guide D'utilisation

Model 24LF4820
Wall mount (A x B)
A
75 X 75
B
Standard screw
M4 X L10
Number of screws
4
Wall mount bracket
RW120
(optional)
CAUTION
y Disconnect the power before moving or installing
y
the TV. Otherwise electric shock may occur.
y Remove the stand before installing the TV on a
y
wall mount by performing the stand attachment
in reverse.
y If you install the TV on a ceiling or slanted wall,
y
it may fall and result in severe injury. Use an
authorized LG wall mount and contact the local
dealer or qualified personnel. When using a third-
party wall mount, it is not covered by the warranty.
y Do not overtighten the screws as this may cause
y
damage to the TV and void your warranty.
y Use the screws and wall mounts that meet the
y
VESA standard. Any damages or injuries by misuse
or using an improper accessory are not covered by
the warranty.
y Screw length from outer surface of back cover
y
should be under 8 mm (0.3 inches).
Wall mount Pad
Back Cover
NOTE
y Use the screws that are listed on the VESA
y
standard screw specifications.
y The wall mount kit includes an installation manual
y
and necessary parts.
y The wall mount bracket is optional. You can obtain
y
additional accessories from your local dealer.
y The length of screws may differ depending upon the
y
wall mount. Make sure to use the proper length.
y For more information, refer to the manual supplied
y
with the wall mount.

CONNECTIONS (Notifications)

You can connect various external devices to the TV.
Supported external devices are: HD receivers, DVD
players, VCRs, audio systems, USB storage devices,
PC, gaming devices, and other external devices. For
more information on external device's connection,
refer to the manual provided with each device.
y If you record a TV program on a DVD recorder or
y
y The external device connections may differ from
y
y Connect external devices to the TV regardless of
y
y If you connect a gaming device to the TV, use the
y
y Refer to the external equipment's manual for
y
y In PC mode, there may be noise associated with the
y
y Depending upon the graphics card, some
y

Antenna connection

y Use a signal splitter to use more than 2 TVs.
y
y If the image quality is poor, install a signal amplifier
y
y If the image quality is poor with an antenna
y
Wall mount Pad

PC connection

Back Cover
Standard screw
When connecting your PC to the HDMI input port, set
: M4 x L10
the HDMI-PC mode to On.
Max.8mm
(0.3 inches)

Other Connections

Connect your TV to external devices. For the best
picture and audio quality, connect the external
device and the TV with the HDMI cable. Depending
upon the model, a cable may not be provided.
NOTE
VCR, make sure to connect the TV signal input
cable to the TV through a DVD recorder or VCR. For
more information of recording, refer to the manual
provided with the connected device.
the model.
the order of the TV port.
cable supplied with the gaming device.
operating instructions.
resolution, vertical pattern, contrast or brightness.
If noise is present, change the PC output to another
resolution, change the refresh rate to another rate or
adjust the brightness and contrast on the PICTURE
menu until the picture is clear.
resolution settings may not allow the image to be
positioned on the screen properly.
properly to improve the image quality.
connected, try to realign the antenna in the correct
direction.

(Q.MENU) (Advanced)
 
Picture HDMI-PC
9