LG 24LF4820 Guide D'utilisation page 39

Troubleshooting Network Problems
Depending upon the version of the software, icon position can be changed.
(Home) button to access the Home
1
Press the /
menu. Select (Settings) and press
(OK).
(Advanced) and press
2
Select
3
Select the Network
(Ethernet) or Wi-Fi Connection
Settings.
NETWORK
Picture
Sound
TV Name
[LG] webOS TV
Channels
Wired Connection (Ethernet)
Network
Wi-Fi Connection
Wi-Fi Direct
General
LG Connect Apps
Safety
Accessibility
Follow the instructions below that match to your
network status.
Check the TV or the AP (Router).
When X appears next to TV:
Check the connection status of the TV,
1
AP (Router) and cable modem.
Power off and power on in the following order; (1st)
2
the cable modem, wait for the cable modem to reset,
(2nd) the AP (Router), wait for the AP (Router) to
reset and (3rd) the TV.
If you are using a static IP, enter the IP directly.
3
Contact Internet service provider or AP (Router)
4
manufacturer.
Wheel
Wheel (OK).
Wired Connection
Advanced
WI-FI
Picture
Network /
Sound
iptime_xu.ji
iptime_shinsung.kang
Channels
iptime_ungkee.choi
iptime_sungho.jo
Network
iptime_seungjun.lee
General
Add a Hidden Wireless Network
Connect via WPS PBC
Safety
Connect via WPS PIN
Advanced Settings
Accessibility
Check the AP (Router) or consult your Internet
service provider.
When X appears next to Gateway:
Unplug the power cord of the AP (Router) or cable
1
modem, wait 10 seconds. Reapply power.
Initialize (Reset) the AP (Router) or cable modem.
2
Contact Internet service provider or AP
3
(Router) manufacturer.
When X appears next to DNS:
Unplug the power cord of the cable modem or the
1
AP (Router), wait 10 seconds. Reapply power.
After the cable modem or AP (Router) has
2
initialized (Reset), try to reconnect.
Check that the MAC address of the TV/AP (Router)
3
is registered with your Internet service provider.
(The MAC address displayed on the right pane of
the network status window should be registered
with your Internet service provider.)
Check the AP (Router) manufacturer's website
4
to make sure your router has the latest firmware
version installed.