Adjusting Sound Volume; Confirming Current Status; Muting The Sound - Pioneer PDP-50MXE10 Mode D'emploi

Operation

Adjusting sound volume

VOLUME
[+/–]
Remote control unit
Main unit operating panel
Press the VOLUME buttons.
Press the [–] or [+] button to respectively decrease and
increase the volume of sound from the speakers.
: 5
VOLUME

Muting the sound

Press the MUTING button on the remote control
unit.
Press the MUTING button again to restore the sound.
Muting is automatically canceled about 8 minutes after
the button is pressed, and the volume level is adjusted to
the minimum level.
Press VOLUME + or VOLUME – to adjust the volume at
a desired level.
20
En

Confirming current status

VOLUME
[+/–]
Main unit operating panel
Press the DISPLAY button.
The currently selected input, screen size and refresh rates
will be displayed for about 3 seconds.
Notes
¶ The displayed refresh rates may be slightly different from
¶ When using the Point zoom function (page 22) or Multiscreen
MUTING
¶ When the screen management function is active, the
DISPLAY
Remote control unit
:
f H 3 1
:
f V 6 0
6 0 4
actual values.
function (page 23), the position and input information for the
enlarged screen area will be displayed.
[SCREEN MGT.] message will also be displayed at the lower
left corner of the screen.
DISPLAY
INPUT1
. 5 k H z
. 0 H z
4 0 8
X
D O T BY D OT