Names Of Parts; Names And Functions Of Indicators And Controls On Indoor Unit - Toshiba RAS-10SKVP-ND Mode D'emploi

A1YPGTU/CPWCNA'0HO 2CIG  9GFPGUFC[ ,CPWCT[     2/

NAMES OF PARTS

Outdoor unit
a Refrigerant connecting pipe and electric wires
b Air inlet (Side and rear)
c Air outlet
Indoor unit
d Room temperature sensor
e Front panel
f Air inlet grille
g Air filter
h Air outlet
i Horizontal air flow louver
Located at the back of the vertical air flow louver.
j Vertical air flow louver
k Display panel
l Infrared signal receiver
m Remote controller
n Plasma pure filter
NAMES AND FUNCTIONS OF INDICATORS AND CONTROLS
ON INDOOR UNIT
Display panel
The operating states are shown below.
a RESET button
b FILTER indicator (Orange)
c TIMER indicator (Yellow)
d PURE indicator (Blue)
e OPERATION indicator (Green)
The operation indicators flash rapidly (5 times per second)
when a safety protection feature is activated.
f S.CLEAN indicator (Green)
When the unit shuts down after having operated for 10 or more
minutes in the cooling or dry mode, the cleaning operation is
started automatically, and the S.CLEAN indicator turns on.
RESET button
The RESET button has the following two functions.
• Reset function
Use when the FILTER indicator (orange) is on. () see page 21.)
• Temporary operation function
Use when you misplace or lose the remote controller, or when its
batteries are used up. () see page 19.)
e f
m
i h n
a b c
3
b
a
c
g
d
k l j
d e f
EN