Setting The Time; Setting The Timer; Childproof Lock; Oven - Junker JB23UA0 Série Mode D'emploi

Setting the time

Following a power cut or when the oven is used for the first
time, the 0 symbol and three zeros flash in the display. Set the
time. The function selector must be switched off.

Setting the timer.

You can use the timer as a normal kitchen timer. It operates
independently of the oven. The timer has a specific signal. This
informs you when the timer or cooking time has elapsed. You
can also set the timer if the childproof lock is active.
Setting procedure
Press the S timer button.
1.
The symbol flashes.
S
Use the + or - buttons to set the timer time.
2.
Default value for button + = 10 minutes
Default value for button - = 5 minutes
The timer starts after a few seconds. The
display. The time counts down in the display.
The time has elapsed
A signal sounds. Press the
goes out.

Childproof lock

Oven

To ensure that the oven cannot be switched on by children
when playing, a childproof lock is incorporated in the
appliance.
Switching the childproof lock on and off
The function selector must be switched off.

Care and cleaning

With good care and cleaning, your oven will remain clean and
fully-functioning for a long time to come. Here we will explain
how to maintain and clean your oven correctly.
Notes
Slight differences in the colours on the front of the oven are
■
caused by the use of different materials, such as glass,
plastic and metal.
Shadows on the door panel which look like streaks, are
■
caused by reflections made by the oven light.
Enamel is baked on at very high temperatures. This can
■
cause some slight colour variations. This is normal and does
not affect their function. The edges of thin trays cannot be
symbol is lit in the
S
timer button. The timer display
S
Setting procedure
Press the clock button.
0
1.
12.00 appears and the
Use the + and - buttons to set the time.
2.
After a few seconds, the time is accepted. The
goes out.
Changing from summer to winter time.
Press the 0 clock button twice and use the + or - buttons to
change the time.
Changing the alarm time
Press the timer button. Use the + or - buttons to change the
S
time.
Delete the setting
Press the S timer button. Press the - button until zeros appear
in the display.
The timer and the cooking time run down in synchronisation
The symbols are lit. The timer time counts down in the display.
Check the remaining cooking time,
x
of day:
Press the 0 clock button repeatedly until the relevant symbol
is displayed.
The requested value appears in the display for several
seconds.
Press the key button repeatedly until the
C
appears in the display. This procedure takes approx.
4 seconds.
Deactivating: Press the
C
symbol goes out.
Notes
You can set the timer and clock at any time.
■
If the childproof lock is active, it will be cancelled following a
■
power cut.
completely enamelled. As a result, these edges can be
rough. This will not impair the anti-corrosion protection.

Cleaning agents

Damage to the various different surfaces caused by using the
wrong cleaning agent can be avoided by observing the
following instructions.
When cleaning the oven do not use
sharp or abrasive cleaning agents,
■
cleaning agent with a high alcohol content,
■
symbol flashes.
0
0
end time or
y
symbol
C
key button repeatedly until the
symbol
time
0
C
41