Troubleshooting - Kenwood KDC-268U Mode D'emploi

DISPLAY SETTINGS
DISPLAY
COLOR SELECT (For
Select color for ALL ZONE, ZONE 1 and ZONE 2 separately.
1 Select a zone. (See illustration on page 14.)
2 Select a color for the selected zone.
VARIABLE SCAN/CUSTOM R/G/B/preset colors*
To make your own color, select [CUSTOM R/G/B]. The color you have
made will be stored in [CUSTOM R/G/B].
1 Press the volume knob to enter the detailed color adjustment.
2 Press S / T to select the color (R/G/B) to adjust.
3 Turn the volume knob to adjust the level (0 to 9), then press the
knob.
DIMMER Dim the illumination.
ON: Dimmer is turned on. ; OFF: Cancels.
DIMMER TIME: Set the dimmer on and off time.
1 Turn the volume knob to adjust the [ON] time, then press the
knob.
2 Turn the volume knob to adjust the [OFF] time, then press the
knob.
(Default: [ON]: PM6:00 or 6:00PM; [OFF]: AM6:00 or 6:00AM)
1 Select a zone. (See illustration on page 14.)
BRIGHTNESS
2 0 — 31: Select your preferred brightness level for the selected
zone.
TEXT SCROLL AUTO/ONCE: Select whether to scroll the display information
automatically, or scroll only once. ; OFF: Cancels.
* Preset colors: RED1/RED2/RED3/PURPLE1/PURPLE2/PURPLE3/PURPLE4/BLUE1/
BLUE2/BLUE3/SKYBLUE1/SKYBLUE2/LIGHTBLUE/AQUA1/AQUA2/GREEN1/
GREEN2/GREEN3/YELLOWGREEN1/YELLOWGREEN2/YELLOW/ORANGE1/
ORANGE2/ORANGERED
Default: XX
)

TROUBLESHOOTING

Symptom
Sound cannot be heard.
"MISWIRING CHECK WIRING
THEN PWR ON" appears.
"PROTECTING SEND SERVICE"
appears.
• Sound cannot be heard.
• The unit does not turn on.
• Information shown on the
display is incorrect.
The unit does not work at all.
• Radio reception is poor.
• Static noise while listening
to the radio.
Disc cannot be ejected.
Noise is generated.
Tracks do not play back as
you intended them to play.
"READING" keeps flashing.
Elapsed playing time is not
correct.
Correct characters are not
displayed (e.g. album name).
"NA FILE"
"NO DISC"
Remedy
• Adjust the volume to the optimum level.
• Check the cords and connections.
Turn the power off, then check to be sure the terminals of
the speaker wires are insulated properly. Turn the power
on again.
Send the unit to the nearest service center.
Clean the connectors. ( 17)
Reset the unit. ( 3)
Connect the antenna firmly.
Press and hold M to forcibly eject the disc. Be careful not
to drop the disc when it is ejected. If this does not solve the
problem, reset the unit. ( 3)
Skip to another track or change the disc.
Playback order is determined when files are recorded.
Do not use too many hierarchical levels or folders.
This is caused by how the tracks are recorded.
• This unit can only display uppercase letters, numbers,
and a limited number of symbols.
• Depending on the display language you have selected
( 5), some characters may not be displayed correctly.
Make sure the disc contains supported audio files. ( 18)
Insert a playable disc into the loading slot.
ENGLISH
15