Cleaning And Maintenance; Put Into Operation - Steba KB 14 Mode D'emploi

Attention! Housing and glass get hot. Danger of
∙
burns! Do not place the appliance on a sensitive sur-
face (e.g. painted furniture) and keep a distance of at
least 70cm to burnable materials.
∙ The backside of the appliance must be positioned direct at the
kitchen wall.
∙ While using an extension cable, pay attention that children do
not pull on or trip over it.
∙ To remove the grill or a pan, please use the attached handle.
Caution when liquids are in the pan – danger of burns.

Cleaning and maintenance:

∙ Ensure that the plug is pulled out of the socket and the appli-
ance is cooled down completely, before cleaning.
∙ Never immerse water on the glass door when it is still hot.
∙ Clean the door, the metal parts in the interior and the surface
with soap water. After that dry all washed parts with a dry cloth.
∙ Don´t use aberasive Materials, acid cleaners, or steel wool for
cleaning.
∙ Clean all other parts with a sponge

Put into operation

Important: Heat the appliance up for at least 10min for the first time to eliminate any
production oil. The appliance can smoke slightly when used the first time. Never put
oversized food inside the oven and prevent any contact to the heating elements.
Food which contains much fat should be grilled on the wire grill in position 2; the
bake pan should be put at position 1. If necessary turn the thermostat a little lower.
Settings
Upper + lower heat + convection
Upper heat + convection
Upper + lower heat
Upper heat
Lower heat
15