Noise/Vibration Information; Technical Data - Bosch GWS 15-125 CIH Professional Notice Originale

OBJ_BUCH-165-008.book Page 19 Thursday, January 28, 2016 11:39 AM
14 Protection guard for cutting*
15 Cutting disc*
16 Hand guard*
17 Rubber sanding plate*
18 Sanding sheet*
19 Round nut*
20 Cup brush*
21 Cutting guide with dust extraction protection guard *
22 Diamond cutting disc*
23 Handle (insulated gripping surface)
24 Direction-of-rotation arrow for grinding spindle
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.

Noise/Vibration Information

Sound emission values determined according to
EN 60745-2-3.
Typically the A-weighted noise levels of the product are:
Sound pressure level 91 dB(A); Sound power level
102 dB(A). Uncertainty K =3 dB.
Wear hearing protection!

Technical Data

Angle Grinder
Article number
Rated power input
Output power
Rated speed
Speed control adjustment
Grinding disc diameter, max.
Thread of grinder spindle
Thread length (max.) of grinder
spindle
Kickback stop
Restarting Protection
Reduced starting current
Constant electronic control
Speed preselection
Weight according to EPTA-
Procedure 01:2014
– with vibration-damping auxiliary
handle
– with standard-auxiliary handle
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Bosch Power Tools
Vibration total values a
determined according to EN 60745-2-3:
Surface grinding: a
Disk sanding: a
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
GWS ... 15-125 CIH 15-125 CIEH 15-125 CITH 15-125 CISTH 15-150 CIH
3 601 ... H30 2..
H30 C..
W 1500
W 860
-1
min 11000
-1
min – 2800 – 11000 2800 – 9300
mm 125
M 14
mm 22




–
kg
2.5
kg 2.4
/II
(triax vector sum) and uncertainty K
h
2
=9 m/s , K=1.5 m/s
h
2 2
=5 m/s , K=1.5 m/s .
h
H30 3.. H30 4.. H30 7..
H30 D.. H30 E.. H30 G..
1500 1500
860 860
11000 9300
125 125
M 14 M 14
22 22
 
 
 
 
 
2.5 2.5
2.4 2.4
/II /II
1 609 92A 29N | (28.1.16)
English | 19
2
,
H30 5..
H30 F..
1500 1500
860 860
7500 9300
– –
125 150
M 14 M 14
22 22
 
 
 
 
– –
2.5 2.6
2.4 2.5
/II /II