Safety; Understanding Safety Labels; State And Local Requirements - Efco PT 2700 Manuel D'utilisation Et D'entretien

Understanding Safety Labels

- This symbol indicates Warning, and
Caution.
- Your manual contains special
messages to bring attention to
potential safety concerns, machine
damage as well as helpful operating
and servicing information. PLEASE
READ ALL THE INFORMATION
CAREFULLY TO AVOID INJURY
AND MACHINE DAMAGE.
- The machineis not electrically
insulated so avoid contact
with high voltage lines. Never
approach the implement at
less than 10 metres from
electric lines. Keep bystanders
away 15 m.

State and Local Requirements

Your pole pruner is equipped with a temperature limiting muffler, a spark arresting screen in order to
comply with the requirements of SAE Recommended Practice J335 and California Codes 4442 and 4443.
All national forest land and land managed by the states of California, Maine, Washington, Idaho,
Minnesota, New Jersey and Oregon require internal combustion engines to be equipped with a
spark arrester screen by law. Other states and federal agencies are enacting similar regulations. If you
operate a pole pruner in a state or locale where such regulations exist, you are legally responsible for
maintaining the operating condition of these parts. Failure to do so is a violation of a law. Spark arrester
maintenance is described in the Maintenance-Spark Arresting Muffler Section of the manual.
Note: When using a pole pruner for logging purposes, refer to Code of Federal Regulations, Parts
1910 and 1928.
WARNING: The ignition system of your unit produces an electromagnetic field of a very
low intensity. This field may interfere with some pacemakers. To reduce the risk of
serious or fatal injury, persons with pacemaker should consult their physician and the
pacemaker manufacturer before operating this tool.
WARNING: Muffler surfaces are very hot during and after operation of the pole pruner,
keep all body parts away from the muffler. Serious burns may occur if contact is made
with the muffler.

SAFETY

- Wear eye, hearing and head
protection when operating this
equipment.
- Wear
protective gloves when handling.
- Wear safety strong shoes or boots
having
anti-piercing insert.
- WARNING! The surface can be
hot!
non-slip, heavy-duty
skid-proof sole and
en
5