Operation; Preparing To Work - Efco PT 2700 Manuel D'utilisation Et D'entretien

en
25A
12

OPERATION

Preparing to work

HARNESS
Correct adjustment of the harness permits the pole pruner to be
properly balanced and at an appropriate height from the ground
(Fig. 21).
- Put on the single harness (Fig. 22).
- Hook the pole pruner to the harness using the hook
(A, Fig. 23).
- Position the buckle (C, Fig. 24) to obtain the correct pole
21
pruner height.
OPERATION
- Put on the harness and always keep both hands on the handle
while operating the pole pruner (Fig. 25A).
- Use the pole pruner as illustrated in Fig. 25B.
WARNING: Carefully read the safety
before using the pole pruner.
22
OPERATING INSTRUCTIONS
WARNING - The pole pruner must only be used for
cutting branch. It is forbidden to cut other types
of material. Vibrations and kickback vary with
different materials and the requirements of the
safety regulations would not be respected. Do not
use the pole pruner as a lever for lifting, moving or
splitting objects. Do not lock it over fixed stands.
It is forbidden to hitch tools or applications to the
P.t.o. that are not specified by the manufacturer.
23
24
25B
precautions