Connections - Teac W-1200 Mode D'emploi

A
W-1200 (rear)
Amplifier
REC PLAY
(OUT) (IN)
TAPE/MD/CD-R
tuner, etc.
Connection example
14

Connections

B
C
Wall outlet
Speakers
V
Complete all other connections before turning
the unit on.
o Carefully read the manuals of the devices that you are connect-
ing and follow their instructions when making connections.
o Do not bundle connecting cables with power cords. Doing so
could cause noise.
o Connect all plugs completely.
A Analog audio input/output (LINE IN/OUT) connectors
LINE IN (line inputs)
Connect these to the line output connectors of the amplifier or
the output connectors of the CD player or other device.
LINE OUT (line outputs)
Connect these to the tape/MD/CD-R, AUX or other input con-
nectors of the amplifier.
Refer to the connection diagram to the left.
B
Voltage selector
Use to switch the voltage to either 230 V or 120 V.
ATTENTION
The voltage selector is only available on units for specific markets.
IN USA/CANADA, USE ONLY ON 120V SUPPLY.
C Power cord
After completing all other connections, plug the power plug
into a power outlet.
o Unplug the cord from the outlet when not using the unit for
a long time.
V
CAUTION
o Be sure to connect the power cord to an AC outlet that
supplies the correct voltage. Connection to an outlet that
supplies incorrect voltage could cause fire or electric
shock.
o Hold the power plug when plugging it into an outlet or
unplugging it. Never pull or yank on the power cord.