Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Maintenance instructions
De-energize device and secure against being switched on again
Extreme danger!
If work is to be performed on the devices,
they must be de-energized. That means that
DANGER!
all power must be switched off.
Switching off the device alone is insufficient,
as certain points may remain energized.
Therefore, switch off breakers before per-
forming any work.
04049 / 0
Extreme danger!
Severe accidents can occur if the device is mistakenly
switched on again.
DANGER!
Immediately after de-energizing, secure all switches or fus-
es used for de-energizing against being switched on again.
– Lock the fuse box with a padlock.
• A strip of adhesive tape with the wording
"DANGER do not switch ON!" may be applied
over the actuation levers of circuit breakers
which cannot be removed.
01510 / 1
A prohibition sign with the text:
"Work in progress!"
• "Place: .............................."
• "Sign may only be removed by: ............"
must always be securely mounted immediately.
01511 / 1
Extreme danger!
Prohibition signs must not be hung on or touch live parts.
DANGER!
Please open this fold-out page.
29
Publicité
Table des Matières
